Fum

Fum Humidors

The best choice to cure your hemp it is in humidors made of okume wood.

Hemp curing process

hemp curing is the next and final step after drying. It is the process in which the rest of the structural water of the buds is lost until around 25% or 30% remains, and during which the maturation reactions of cannabinoids and terpenes take place, in addition to allowing the production of chlorophyll.

This process can take anywhere from three weeks to a month or so, depending on where and how you are curing the flower (humidity and room temperature still influence this process).

The best choice to cure your hemp

With this time you make sure that most of the chlorophyll has been degraded and a large percentage of the THC leaves its acid state (THC-A), to become psychoactive (THC).

During the curing process you should also avoid light on the buds. The best choice to cure your hemp it is in humidors made of okume wood.

Wood is a hygroscopic material with the ability to yield and absorb moisture, helping to create a balance.

Air renewal is very important. hemp buds will continue to release moisture for the first few weeks, so you have to open the humidor, let the humid air out, and close it again.

About the curing process

If you’ve properly dried and cured your buds, just keep them in a relatively airtight, opaque container. We recommend the use of wooden humidors.

Several studies have empirically shown that hemp retains higher terpene and cannabinoid content when this range of humidity is present for an extended period of time. This translates into a more robust flavor and a more forceful effect. Here are some tips on why we recommend wood over other types of materials.

Important: The relative humidity for the storage of hemp or CBD is 55% – 62% RH.

Due to the faculties that wood has and if it is well treated, it absorbs or releases humidity to the environment. Create temperate environments. Warmer in cold environments and cooler in high temperature environments. That is, it is one of the best thermal insulators that exists.

Wood is a natural and very powerful material. It has waterproof faculties and also absorbs moisture. A neutral wood with an appropriate porosity, it is capable of absorbing humidity without being damaged and of maintaining and even enhancing the faculties of the flower that is being stored in it. It does not harm terpenes and is capable of isolating the fragrance abroad.

In addition, due to its strength, it becomes a long-lasting element and in the event of mishandling or an accident, the flower stored inside would not be contaminated. These faculties make it more appropriate for the curing and maintenance of hemp compared to other materials such as glass, cardboard or plastic.

A humidor is a closed container, usually made of wood, that contains a humidification system. By maintaining a good level of humidity, hemp or CBD can be stored almost indefinitely. The humidity level is measured with a hygrometer.

Important: The relative humidity for the storage of hemp or CBD is 55% – 62% RH.


Most humidors come already equipped with a hygrometer. It is an essential element for the curing and storage process of the flower.

Unlike other woods widely used in the packaging or manufacture of humidors, okume has the appropriate porosity for hemp storage. This porosity makes it a very neutral wood, which prevents the transfer of the fragrance and flavor of the wood itself to the grain, allowing a correct circulation of air and humidity. It precisely creates the reverse effect.

It is capable of enhancing the aroma and flavor of the flower over time and isolating it from external factors, avoiding odor leakage and protecting it from possible harmful elements such as humidity, temperature, light or air pollution. What makes it an essential element if you want to achieve optimal hemp curing.

A uniquely designed hemp curing and storage wood humidor for short and long-term storage

FUM® preserves the property conditions for the flower by controlling humidity at the perfect ratio to maintain freshness and taste. Okume wood humidors protect the trichomes that contain cannabinoids. A dark and controlled humid environment is ideal, it should to be on 58 to 62% of relative humidity.

If it is more than this rates relative humidity (RH), your bud will run the risk of supporting mold growth, something that traditional glass jars has the potential to do because the humidity is difficult to control with glass jars.

FUM humidors are specially made for hemp curing and storage

Made in okume wood and with hermetic seal to preserves the properly conditions for the flowers by controlling humidity and the air renewal at the perfect ratio to maintain freshness, aroma and taste.

Okume wood does not produce any residue, odors and oils as other woods. It is the ideal material to control the humidity and air renewal without any damage to the hemp flower and also to protect the trichomes that contain cannabinoids.

Okume wood it is also resistant to swelling and shrinking under changes in relative humidity providing stability for the long term.

FUM humidors allow the bests conditions for the hemp curing and storage

They provide a dark and controlled humid environment that should to be on rates between 58 to 62% of relative humidity with an adequate air renewal.
If it is more than this rates relative humidity (RH), your flower will run the risk of supporting mold growth. Something that normally happen with the traditional glass jars.

FUM humidors include a space to fix a humidity pack. This method of humidification requires no work. Simply set it and forget it, and when the pack starts to turn hard, that means it’s time to replace. We’ve seen great results with those humidity packs products for long-term curing.Our

FUM® humidors require at least one 60g pack. They’re extremely efficient in the okume wood humidor, products absorbs the moisture that it emits and therefore this results in a slightly lower relative humidity than 62% RH.´

Quality, innovation and functionality are the most important concepts that define FUM humidors

Every design of humidor that we develop is made with the best quality materials and finishings.

Including new connecting technologies to make easy and functional the use of the humidors and to create unique experiences for the user.

Wood VS Glass humidor

The best choice to cure your hemp it is in humidors made of okume wood.

Advantages of okume wood in front of glass

hemp curing is the next and final step after drying.

It is the process in which the rest of the structural water of the buds is lost until around 25% or 30% remains, and during which the maturation reactions of cannabinoids and terpenes take place, in addition to allowing the production of chlorophyll.

Greater resistance

Natural element or material

Biodegradable

Does not generate magnifying glass effect

Opacity

Allows proper air circulation

Allows proper moisture circulation

Allows better regulation and control of the humidity inside, which allows us not to have to open and close the humidor for its control, thus avoiding possible contamination or odor leakage

Does not harm terpenes

Enhances the faculties of hemp or CBD terpenes

Preserves the privacy of the content

Decorative element or accessory

Distinction and elegance

Greater security and privacy control

More design possibilities, which makes it easier to handle and the possibility of keeping different varieties of hemp or CBD.